Disclaimer: This amplifier will require an additional charging system to run efficiently. It will run without the additional charging system but you run the risk of damaging the amplifier and/or not getting the optimum power out of it. The additional charging system includes the Big 3 upgrade, a high output alternator, as well as adding an AGM or Lithium car audio battery. All of our amplifiers are age tested for an hour before going into stock.
Following the massive footsteps of our most popular mono amp, the S1-2250.1 monoblock car amp has even more heat sinking and improved circuitry than its predecessor. The advanced heat reduction and a heavy-duty printed circuit board helps to keep its overall operating temperature low, to prevent internal damage.
High-quality class D amp design keeps your amplifier cool, guarantees low rates of total harmonic distortion, and prevents its high output performance from damaging your car. To enjoy the full power this amplifier offers, you will need an upgraded electrical charging system.
The S1-2250.1 drives an immense 2800 watt load at 1 ohm on 16 volts and 2300 watts on 14.4 volts at one ohm.
Strappable for 4600 watts at 2 ohms, this budget King mono block amp is capable of and ready for Sound Pressure Level competitions and anything else your car stereo can throw its way.
The S1-2250.1’s screw terminals accommodate up to 1/0 AWG power wire and up to 10 gauge speaker wire. Find everything you need to install this amplifier with our Zero Gauge Amp Kit.
To secure a long life for your new amplifier, a remote gain control knob is included with your S1-2250.1. The LED indicator alerts you straight away to the presence of clipping signals that can quickly burn or separate your subwoofer voice coils, as well as create bubbles in your former.
We include the remote gain knob to help you avoid costly and needless damage to your gear.
|Working Voltage||8.5 V – 16 V|
|Maximum Amperage||225 Amps|
|Power @ 4 Ohm 14.4V||800 Watts RMS|
|Power @ 2 Ohm 14.4V||1300 Watts RMS|
|Power @ 1 Ohm 14.4V||2300 Watts RMS|
|Frequency Response||10 Hz – 200 Hz|
|S/N Ratio||Greater than 80|
|Damping Factor||Greater than 100|
|Input Sensitivity||5 V – 0.15 V|
|Subsonic Filter||10 Hz – 50 Hz|
|Low-Pass Filter||20 Hz – 200 Hz|
|Dimensions in (LxWxH)||19.6 x 7.8 x 2.2|